Fortinet 548B - Manual (Page 590)

- 590 -
10.4.2.24 area virtual-link hello-interval
This command configures the hello interval for the OSPF virtual interface on the interface identified by
<areaid> and <neighborid>.
Syntax
area <areaid> virtual-link <neighborid> hello-interval <1-65535>
no area <areaid> virtual-link <neighborid> hello-interval
<areaid> - Area ID.
<neighborid> - Router ID of the neighbor.
<1-65535> - The range of the hello interval is 1 to 65535.
no - This command configures the default hello interval for the OSPF virtual interface on the
interface identified by <areaid> and <neighborid>.
Default Setting
10 seconds.
Command Mode
Router OSPFv3 Config
10.4.2.25 area virtual-link retransmit-interval
This command configures the retransmit interval for the OSPF virtual interface on the interface identified
by <areaid> and <neighborid>.
Syntax
area <areaid> virtual-link <neighborid> retransmit-interval <0-3600>
no area <areaid> virtual-link <neighborid> retransmit-interval
<areaid> - Area ID.
<neighborid> - Router ID of the neighbor.
<0-3600> - The range of the retransmit interval is 0 to 3600.
no - This command configures the default retransmit interval for the OSPF virtual interface on the
interface identified by <areaid> and <neighborid>.
Default Setting
5 seconds.
Command Mode
Router OSPFv3 Config