Fortinet 548B - Manual (Page 931)

- 931 -
Upstream Neighbor - The address of the upstream neighbor (e.g., RPF neighbor) from which IP
datagrams from these sources are received.
Interface - The interface on which IP datagrams sent by these sources are received. A value of 0
typically means the route is an aggregate for which no next-hop interface exists.
Metric - The distance in hops to the source subnet.
Expiry Time (secs)- The minimum amount of time remaining before this entry will be aged out.
Up Time (secs)- The time since the route represented by this entry was learned by the router.
Command Buttons
Refresh - Refresh the screen with the new data.
11.8.2 Managing IGMP Protocol
11.8.2.1 Configuring IGMP Global Configuration Page
Configurable Data
Admin Mode - Select enable or disable from the pulldown menu to set the administrative status of
IGMP in the router to active or inactive. The default is disable.
Command Buttons
Submit - Send the updated configuration to the router. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
11.8.2.2 Configuring IGMP Interface Configuration Page