Fortinet 548B - Manual (Page 450)

- 450 -
Command Mode
Router OSPF Config Mode
8.3.2.8 area nssa default-info-originate
area nssa default-info-originate command configures the metric value and type for the default route
advertised into the NSSA. The optional metric parameter specifies the metric of the default route and is
to be in a range of 1-16777214. If no metric is specified, the default value is ****. The metric type can be
comparable (nssa-external 1) or non-comparable (nssa-external 2). This command disables the default
route advertised into the NSSA . no area nssa default-info-originate command disables the default
route advertised into the NSSA.
Syntax
area <areaid> nssa default-info-originate [<metric>] [{comparable | noncomparable}]
no area <areaid> nssa default-info-originate [<metric>] [{comparable | noncomparable}]
Default Setting
None
Command Mode
Router OSPF Config Mode
8.3.2.9 area nssa no-redistribute
area nssa no-redistribute command configures the NSSA Area Border router (ABR) so that learned
external routes will not be redistributed to the NSSA. no area nssa no-redistribute command disables
the NSSA ABR so that learned external routes are redistributed to the NSSA
Syntax
area <areaid> nssa no-redistribute
no area <areaid> nssa no-redistribute
Default Setting
None
Command Mode
Router OSPF Config Mode
8.3.2.10 area nssa no-summary
area nssa no-summary command configures the NSSA so that summary LSAs are not advertised into
the NSSA. no area nssa no-summary command disables nssa from the summary LSAs