Fortinet 548B - Manual (Page 227)

- 227 -
7.5.2.5 logging host
This command enables logging to a host where up to eight hosts can be configured.
Syntax
logging host <hostaddress> [ <port>] [[<severitylevel> | <0-7>]]
<hostaddress> - IP address of the log server.
<port> - Port number.
[<severitylevel> | <0-7>] - The value is specified as either an integer from 0 to 7 or symbolically
through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4),
notice (5), informational (6), debug (7).
Default Setting
None
Command Mode
Globla Config
This command disables logging to hosts.
Syntax
logging host remove <hostindex>
<hostindex> - Index of the log server.
Default Setting
None
Command Mode
Globla Config
This command reconfigures the IP address of the log server.
Syntax
logging host reconfigure <hostindex> <hostaddress>