Fortinet 548B - Manual (Page 389)

- 389 -
7.22 ACL Command
7.22.1 Show Commands
7.22.1.1 show mac access-lists name
This command displays a MAC access list and all of the rules that are defined for the ACL. The
<name> parameter is used to identify a specific MAC ACL to display.
Syntax
show mac access-lists <name>
<name> - ACL name which uniquely identifies the MAC ACL to display.
Default Setting
None
Command Mode
Privileged Exec
Display Message
MAC ACL Name: The name of the MAC ACL rule.
Rule Number: The ordered rule number identifier defined within the ACL.
Action: Displays the action associated with each rule. The possible values are Permit or
Deny.
Source MAC Address: Displays the source MAC address for this rule.
Source MAC Mask: Displays the source MAC mask for this rule.
Destination MAC Address: Displays the destination MAC address for this rule.
Destination MAC Mask: Displays the destination MAC mask for this rule.
Ethertype: Displays the Ethertype keyword or custom value for this rule.
VLAN ID: Displays the VLAN identifier value or range for this rule.
CoS Value: Displays the COS (802.1p) value for this rule.
Assign Queue: Displays the queue identifier to which packets matching this rule are assigned.
Redirect Interface: Displays the slot/port to which packets matching this rule are forwarded.
Mirror Interface: Displays the slot/port to which packets matching this rule are copied.
7.22.1.2 show mac access-lists
This command displays a summary of all defined MAC access lists in the system.