Fortinet 548B - Manual (Page 136)

- 136 -
This command removes all configured probe ports and mirrored port.
Syntax
no port-monitor
Default Setting
None
Command Mode
Global Config
7.2.13.3 port-monitor session mode
This command configures the mode parameter to enabled the administrative mode of the session. If
enabled, the probe port monitors all the traffic received and transmitted on the physical monitored port.
Syntax
port-monitor session <session-id> mode
no port-monitor session <session-id> mode
<session-id> - Session ID.
no - This command disables port-monitoring function for a monitor session.
Default Setting
None
Command Mode
Global Config
7.2.14 Link State
7.2.14.1 show link state
Show link state information.
Syntax
show link state