Fortinet 548B User Manual
Page 724
- 724 -
will need to rejoin in order to maintain registration. An instance of this timer exists for each GARP
participant for each port. The Leave All Period Timer is set to a random value in the range of
LeaveAllTime to 1.5*LeaveAllTime. Permissible values are 200 to 6000 centiseconds (2 to 60
seconds). The factory default is 1000 centiseconds (10 seconds).
11.3.12.2 Configuring the whole Switch GARP Configuration Page
!
It can take up to 10 seconds for GARP configuration changes to take effect.
Selection Criteria
GVRP Mode - Choose the GARP VLAN Registration Protocol administrative mode for the switch by
selecting enable or disable from the pull down menu. The factory default is disabled.
GMRP Mode - Choose the GARP Multicast Registration Protocol administrative mode for the switch
by selecting enable or disable from the pull down menu. The factory default is disabled.
Command Buttons
Submit - Update the switch with the values you entered. If you want the switch to retain the new
values across a power cycle you must perform a save.