Fortinet 548B - Manual (Page 356)

- 356 -
7.20.1.4 show arp access-list
This command displays the configured ARP ACLs with the rules. Giving an ARP ACL name as the
argument will display only the rules in that ARP ACL.
Syntax
show arp access-list [acl-name]
Default Setting
None
Command Mode
Privileged Exec
7.20.2 Configuration Commands
7.20.2.1 ip arp inspection validate
This command enables additional validation checks like source-mac validation, destination-mac
validation, and ip address validation on the received ARP packets.
Syntax
ip arp inspection validate {[src-mac] [dst-mac] [ip]}
no ip arp inspection validate {[src-mac] [dst-mac] [ip]}
no - This command disables the additional validation checks on the received ARP packets.
Default Setting
Disabled
Command Mode
Global Config
7.20.2.2 ip arp inspection vlan
This command enables Dynamic ARP Inspection on a list of comma-separated VLAN ranges.
Syntax
ip arp inspection vlan <vlan-list>
no ip arp inspection vlan <vlan-list>