Fortinet 548B - Manual (Page 274)

- 274 -
7.10 SNTP (Simple Network Time Protocol) Commands
7.10.1 Show Commands
7.10.1.1 show sntp
This command displays the current time and configuration settings for the SNTP client, and indicates
whether the local time has been properly updated.
Syntax
show sntp
Default Setting
None
Command Mode
Privileged Exec
Display Message
Last Update Time Time of last clock update.
Last Unicast Attempt Time Time of last transmit query (in unicast mode).
Last Attempt Status Status of the last SNTP request (in unicast mode) or unsolicited message (in
broadcast mode).
Broadcast Count Current number of unsolicited broadcast messages that have been received and
processed by the SNTP client since last reboot.
Time Zone Time zone configured.
This command displays SNTP client settings.
Syntax
show sntp client
Default Setting
None
Command Mode
Privileged Exec
Display Message
Client Supported Modes Supported SNTP Modes (Broadcast, Unicast, or Multicast).
SNTP Version The highest SNTP version the client supports.
Port SNTP Client Port