Fortinet 548B - Manual (Page 73)

- 73 -
Command Mode
Global Config
7.2.3.19 switchport forbidden vlan
This command used to configure forbidden VLANs.
Syntax
switchport forbidden vlan {add | remove} <vlan-list>
no switchport forbidden
<vlan-list> - VLAN ID (Range: 1 –3965) – separate non-consecutive IDs with ',' and no spaces and
no zeros in between the range; Use '-' for range.
add - VLAND ID to add.
remove - VLAND ID to remove.
no - Remove the list of forbidden VLANs.
Default Setting
None
Command Mode
Interface Config
7.2.3.20 switchport priority
This command configures the default 802.1p port priority assigned for untagged packets for a specific
interface.
Syntax
switchport priority <0-7>
<0-7> - The range for the priority is 0 - 7.
Default Setting
0
Command Mode
Interface Config