Lenze Drive PLC Developer Studio 9300 Servo PLC (V8.x) - Manual (Page 110)

3.5 System error messages
9300 Servo PLC
Appendix
3−8
L
9300 Servo PLC EN 5.0
3.5 System error messages
The fault memory (C0168/x) stores the error messages with an offset which indicates the type of the
response:
No. of the error message Type of response
0xxx TRIP
1xxx Message
2xxx Warning
3xxx FAIL−QSP
Example: C0168/1 = 2061
·
x061:
The current error (subcode 1 of C0168) is a communication error (error message "CE0"/No.
"x061") between the AIF module and the PLC.
·
2xxx:
The response is a warning.
The current error number is also indicated in the variable DCTRL_wFaultNumber of the PLC program.
Tip!
Occurring faults generally do not affect the operating ability of the PLC!