Lenze Drive PLC Developer Studio 9300 Servo PLC (V8.x) - Manual (Page 167)

9300 Servo PLC
Index
4−5
L
9300 Servo PLC EN 5.0
SYSTEM_FLAGS, 2−86
SYSTEM_FLAGS (system flags)
Inputs SYSTEM_FLAGS, 2−86
Outputs SYSTEM_FLAGS, 2−87
System bus (CAN), 3−2
Siehe auch Manual "System bus (CAN) for Lenze PLC devices"
System error messages, 3−8
Causes and remedies, 3−13
Overview, 3−9
Reset, 3−12
Responses, 3−12
System error messages of the motor control, 2−64
System POUs, 3−7
System variables, 1−5
SYSTEM_FLAGS, 2−86
SYSTEM_FLAGS (system flags)
Inputs SYSTEM_FLAGS, 2−86
Outputs SYSTEM_FLAGS, 2−87
T
Temperature monitoring
Heatsink, 2−73 , 2−75
Motor, 2−74 , 2−76 , 2−77
Temporary codes, 3−52
Term definitions, 1−2
Terminal extension 9374IB, 3−2
Torque control, with speed limitation, 2−53
Torque limitation, 2−50
Torque setpoint, 2−49
Touch probe (TP), 2−58
Configuration, 2−58
Digital frequency input (DFIN), 2−33
Function sequence, 2−59
MCTRL_nNAct_v, 2−59
TRIP, 2−65 , 3−12
TRIP status (DCTRL_bExternalFault_b), 2−26
TRIP−RESET, 3−18
Troubleshooting and fault elimination, monitoring, motor
current load (I2 x t monitoring), 2−68
U
Undervoltage, Monitoring, 2−71
W
Warning, 2−65 , 3−12