Lenze Drive PLC Developer Studio 9300 Servo PLC (V8.x) - Manual (Page 126)

3.6 Code table
9300 Servo PLC
Appendix
3−24
L
9300 Servo PLC EN 5.0
Code Info Possible settings LCD Code Info
Selection Lenze
LCD
[C0085] Mot Ls à Leakage inductance of the motor
à Dependent on C0086
·
If C0086 is changed, the value is reset to the assigned
Lenze setting.
·
Change sets C0086 = 0.
0.00 {0.01 mH} 200.00