Lenze Drive PLC Developer Studio 9300 Servo PLC (V8.x) - Manual (Page 134)

3.6 Code table
9300 Servo PLC
Appendix
3−32
L
9300 Servo PLC EN 5.0
Code Info Possible settings LCD Code Info
Selection Lenze
LCD
C0157 Stat. FreeBit g Status word DCTRL: Status of freely definable bits
0 1
1 DCTRL_bStateB0_b
2 DCTRL_bStateB2_b
3 DCTRL_bStateB3_b
4 DCTRL_bStateB4_b
5 DCTRL_bStateB5_b
6 DCTRL_bStateB14_b
7 DCTRL_bStateB15_b
C0161 Act trip
g
Current TRIP
·
Same as C0168/1
·
"0" is displayed for FAIL−QSP, warning and message.
C0167 Reset failmem 0 Reset fault memory
0 No function
1 Delete all entries in history buffer
C0168 Fail number
g
Fault memory: Error messages
·
List with error messages in their chronological order of
occurrence.
All error messages
1 Current error message
2 Last error message
3 Last but one error message
4 Last but two error message
5 Last but three error message
6 Last but four error message
7 Last but five error message
8 Last but six error message
C0169 Failtime g Fault memory: Power−on time
·
Listing of the power−on times until an error message
has occurred under C0168/x.
·
Refers to the power−on time meter (C0179)
0 {1 s} 65535
1 Current error message
2 Last error message
3 Last but one error message
4 Last but two error message
5 Last but three error message
6 Last but four error message
7 Last but five error message
8 Last but six error message
C0170 Counter g Fault memory: Frequency of error messages
·
List with the frequency of successive occurrence of an
error message under C0168/x.
0 {1} 65535
1 Current error message
2 Last error message
3 Last but one error message
4 Last but two error message
5 Last but three error message
6 Last but four error message
7 Last but five error message
8 Last but six error message