MTS Model FlexTest SE - Manual (Page 63)

Model 497.01 Analog Chassis
Models FlexTest® IIm/GT/SE Controller Hardware Installation 63
Model 497.01 Analog Chassis
About Analog Chassis Slots
Slot pairing Chassis slot assignments are grouped in pairs. If you have a conditioner in a slot,
then you cannot have a valve driver installed in the slot paired with it. Slots are
paired as follows:
Slot assignments
The analog chassis contains 18 bus-board slots for plug-in modules. Each slot is
reserved for a particular type of plug-in module.
Slot A
Reserved for the Model 497.34 Multistation Interlock Module.
Slot B Reserved for the Model 497.36 Communications Module.
Slots 1–4
These slots are reserved for up to four AC conditioners.
Slots 5–8
These slots are reserved for up to four DC conditioners.
Slots 9–12 These slots are reserved for options (not used with standard systems).
Slots 13–16
These slots are reserved for up to four valve drivers.
Slots 1–2
Slots 3–4
Slots 5–6
Slots 7–8 Slots 9–10
Slots 11–12
Slots 13–14
Slots 15–16