MTS Model FlexTest SE User Manual
Page 224
Advertising
![background image](/manuals/568034/224/background.png)
Models FlexTest® IIm/GT/SE Controller Hardware
Cable Part Numbers
FlexTest SE Controller Connections
224
Sensor cables
See
on page 100 for a detailed list of sensor cables and part
numbers.
For the most current part numbers, see the System Cable/Jumper Plug 493
Package Selection drawing (PN 700-000-656).
* -XX specifies cable length. –01 through –09 represent 10–50 ft. in 5 ft. increments. Higher numbers
represent custom cable lengths
.
† Jumper plugs are required if a cable is not installed.
‡ The connector is the 10/100 BaseT connector on the power PC module.
Advertising
This manual is related to the following products: