Adjust the command signal with station manager, Task 4 start the external command – MTS Model FlexTest SE User Manual
Page 212
Advertising
Models FlexTest® IIm/GT/SE Controller Hardware
How to Enable and Run External Command Inputs
FlexTest IIm Controller Connections
212
Task 3
Adjust the command signal with Station Manager.
For more information, see “How to Enable and Run External Command Inputs”
in the MTS 793 Control Software manual.
Task 4
Start the External Command.
For more information, see “How to Enable and Run External Command Inputs”
in the MTS 793 Control Software manual.
Advertising
This manual is related to the following products: