MTS Model FlexTest SE - Manual (Page 184)

Models FlexTest® IIm/GT/SE Controller Hardware
ADDA II Connections
FlexTest IIm Controller Connections 184
ADDA II Connections
Each optional Model 493.50 ADDA II module supports up to four mezzanine
cards. Each installed mezzanine card is assigned a specific ADDA II module
front panel connector (J11–J18).
A hardware interface file (.hwi) defines each type of module (and their associated
mezzanine cards) and maps each module location for the system software. The
hwi file and the physical locations for each type of module and associated
mezzanine cards must match. Also, the ADDA II module address setting (on the
module) must match the .hwi file address.
The following mezzanine cards can be installed:
– Model 493.55 A/D
– Model 493.56 D/A
– Model 493.57 DSPAD
– Model 493.59 Universal Encoder
ADDA II Module I/O
Connections
The Model 493.55 A/D, Model 493.57 DSPAD, and Model 493.56 D/A
mezzanine cards can be installed in the Model 493.50 ADD II module assembly
as needed. A connection from the front panel connector to a rear panel BNC
transition module allows easy access to the analog channels.