MTS Model FlexTest SE - Manual (Page 25)

Specifications
Models FlexTest® IIm/GT/SE Controller Hardware Introduction 25
FlexTest SE stand-alone
function generation
A function generator (with a built-in cycle counter) in the controller provides
basic sine, square, triangle, and ramp command waveforms.
For tests requiring complex waveforms, the controller provides an external
command input to receive externally generated commands.
The function generator waveform can be output to another MTS FlexTest SE
Controller (or any external device) for synchronization.
FlexTest SE automated
configuration
In the automated configuration, the FlexTest SE Controller has added
capabilities—it can acquire data, perform automated testing, apply complex
control compensation techniques to the servoloop, and execute sophisticated test
procedures that include complex triggering mechanisms.
The automated configuration includes the controller, a personal computer, and
the Model 793.00 System Software bundle. It may also include optional MTS
software for additional capability.