MTS Model FlexTest SE - Manual (Page 208)

Models FlexTest® IIm/GT/SE Controller Hardware
How to Program an External Controller
FlexTest IIm Controller Connections 208
For mroe information, see “How to Configure an Externally Conditioned
Feedback Signal” in the MTS 793 Control Software manual.
Task 3 Set up your program.
Define a program with the Function Generator, Basic TestWare, or Multipurpose
TestWare applications.
Using Function
Generator
Refer to “How to Program with the Function Generator” in the MTS 793 Control
Software manual.
Using Basic TestWare The Basic TestWare application allows you to create simple test programs that do
not require complex signal management or mode switches for station
configuration files.
Refer to “Defining the Test Command” in the MTS 793 Control Software manual.
Note It is good practice to use tapered wave shapes to apply the program
command to the external controller slowly.
Using MultiPurpose
TestWare
To create more sophisticated test programs, use the optional MultiPurpose
TestWare application.
For more information, see the MTS 793 Application Software manual.