MTS Model FlexTest SE - Manual (Page 153)

How to Provide Program to a Series 407 Controller
Models FlexTest® IIm/GT/SE Controller Hardware FlexTest GT Controller Connections 153
2. On the Series 793 Controller, create a station configuration file.
Use the Station Builder application to define controller resources to provide
program to the Model 407 Controller. When you create this type of station
configuration, you typically select an analog output for the channel output
resource, and Program Only or Program with Feedback for the channel type.
If you create a Program with Feedback channel, you typically select analog
inputs for the control mode input resources. This allows you to receive 407
control mode feedback. You also select unit type and dimension.
Note Because of wiring considerations between 793 and 407 Controllers, you
must assign an HSM in the station configuration file even if an HSM does
not control power to the external controller.
3. On the 793 Controller, adjust the program signals.
Program In
Conditioner
Monitor
Conditioner
Monitor
Program In
Conditioner
Monitor
Conditioner
Monitor
Program In
Conditioner
Monitor
Conditioner
Monitor
407
407
407
Ch 1
Ch 2
Ch 3
Ch 4
Ch 5
Ch 6
m
J11 (Ch 1-4)
J12 (Ch 5-6)
493.76 Analog Out
Ch 1
Ch 2
Ch 3
Ch 4
Ch 5
Ch 6
m
J11 (Ch 1-4)
J12 (Ch 5-6)
493.77
Filtered In
493.76 Analog Out
493.76 Filtered
Analog Input
Multiple 407 Controller Connections