MacDon PW8 Pick-Up Header - Manual (Page 104)

MAINTENANCE AND SERVICING
Replace bracket as follows if damaged or broken.
NOTE: Endshield does not have to be removed to replace
bracket.
1. Locate broken bracket (A).
2. Remove bolts (B) and (C) securing bracket (A) to
header frame and endshield, and remove bracket.
3. Position bracket (A), and secure to header frame with
bolt (B) and nut. Do not tighten.
4. Attach bracket to endshield with bolt (C) and nut. Do
not overtighten bolt so that plastic endshield is severely
deformed.
5. Tighten other bolt. Figure 4.20: Endshield and Light Removed for
Clarity
169489
96
Revision A