MacDon PW8 Pick-Up Header - Manual (Page 37)

OPERATION
3.5 Hold-Down Lift Cylinder Safety Props
WARNING
To avoid bodily injury from fall of raised hold-down, always engage cylinder safety props before going
under raised hold-down for any reason.
IMPORTANT:
To prevent damage to hold-down support arms, do not transport header with cylinder safety props engaged.
Lift cylinder safety props are located at each hold-down support arm.
To engage lift cylinder safety props:
1. Raise hold-down to maximum height.
2. Move safety props to engaged position.
3. Lower hold-down onto safety props.
Figure 3.7: Engaged
To disengage lift cylinder safety props:
4. Raise hold-down to maximum height.
5. Move safety props to disengaged position.
Figure 3.8: Disengaged
169489
29
Revision A