MacDon PW8 Pick-Up Header User Manual
Page 120
Advertising
2. Route hoses (A) and (B) through grommet (C) in cover.
Attach hoses (A) and (B) to multi-coupler, matching
colored cable ties. If colored ties are missing attach
as follows:
a. Attach longer hose (A) to forward port on
forward drive motor (E), and to connector (1) on
multi-coupler.
b. Attach shorter hose (B) to aft port on rear drive
motor, and to connector (2) on multi-coupler.
c. Secure hoses with cinch strap (D).
Figure 4.56
3. Connect the shortest hose (A) to motors. Angled fitting
attaches to rear motor (B).
Figure 4.57
4. Secure hoses with clips (A) and cinch straps (B).
Figure 4.58
169489
112
Revision A
Advertising