4auger drive, Auger drive chain, Lubricating auger drive chain – MacDon PW8 Pick-Up Header User Manual
Page 121: Auger drive, 4 auger drive, Danger
5. Reinstall cover (B), and tighten the three bolts (A) along
lower edge of cover.
Figure 4.59
6. Close left endshield. Refer to Section:
4.6.4
Auger Drive
The auger is chain driven through a driveline that is connected to the combine feeder house shaft, and depends on
the operating speed of the combine.
The auger speed range can be changed by changing the auger drive sprocket. Refer to
.
Access the auger drive by opening the left endshield.
Auger Drive Chain
Lubricating Auger Drive Chain
DANGER
Stop engine and remove key from ignition before leaving operator’s seat for any reason. A child or even
a pet could engage an idling machine.
1. Lower header to ground, shut down combine, and
remove key from ignition.
2. Open left endshield (A). Refer to Section
Figure 4.60: Endshield
169489
113
Revision A