MacDon PW8 Pick-Up Header User Manual
Page 58
Advertising
12. Remove coupler (A) from storage location on combine,
and clean mating surface of coupler.
Figure 3.51: Combine Coupler/Connector
13. Position coupler onto header receptacle (A), and push
handle (B) downward to engage pins into receptacle.
14. Push handle (B) to closed position until lock button (C)
snaps out.
15. Open cover (D) on header electrical receptacle.
16. Remove electrical connector (E) from combine.
17. Align lugs on electrical connector (E) with slots
in header receptacle, and push connector onto
receptacle. Turn collar on connector to lock it in place.
Figure 3.52: Attaching Coupler
169489
50
Revision A
Advertising