MacDon PW8 Pick-Up Header - Manual (Page 49)

OPERATION
3.10.2 John Deere 60, 70, and S Series
This section provides instruction for attaching the MacDon
PW8 Pick-Up Header to and detaching from John Deere
combines including: 9660, 9760, 9860, 9670, 9770, 9870
and S Series - Contour Master and Level Land.
Figure 3.27: John Deere Combine
Attaching to John Deere 60, 70 and S Series Combine
1. Push handle (A) on combine coupler toward feeder
house to retract pins (B) at bottom corners of feeder
house.
Figure 3.28: Feederhouse Locks
2. Slowly drive combine up to header until feeder house
saddles (A) are directly under the header top beam (B).
3. Raise feeder house to lift header, ensuring feeder
saddles are properly engaged in header frame.
4. Position header until slightly off the ground, stop engine
and remove key from ignition.
WARNING
Stop combine engine and remove key before making
adjustments to machine. A child or even a pet could
engage the drive.
Figure 3.29: Header on Combine
169489
41
Revision A