MacDon PW8 Pick-Up Header - Manual (Page 140)

MAINTENANCE AND SERVICING
7. Remove M6 flange nuts (A), and straps (B) connecting
adjacent belts. Remove elevator bolts (C).
8. Remove draper belt (D).
Figure 4.103
Installing Rear Draper Belt
1. Wrap new draper belt (D), slats outward, around the
rollers. Arrow on belt should point in direction of
rotation.
2. Connect draper belt (D) with M6x15.5 pronged elevator
bolts (C).
3. If installing end belt, attach edge protector (B), and
secure with M6 flange nuts (A). Do not tighten.
Figure 4.104
Figure 4.105: Elevator Bolts
1. Pronged Elevator Bolt 2. Square Neck Elevator Bolt
169489
132
Revision A