Warning – MacDon PW8 Pick-Up Header User Manual
Page 53
Advertising
Detaching from John Deere 60, 70, and S Series Combine
1. Choose a level area. Position header slightly above
ground. Stop engine and remove key.
WARNING
Stop combine engine and remove key before making
adjustments to machine. A child or even a pet could
engage the drive.
2. Pull out knob (A) on combine coupler, and move
handle (B) toward feeder house to release coupler (C)
from combine, and to retract locking pins at base of
feeder house.
Figure 3.38
3. Lower handle (A) on header, and position coupler (B)
in header as shown.
Figure 3.39
169489
45
Revision A
Advertising