MacDon PW8 Pick-Up Header User Manual
Page 158
Advertising
9. Secure bearing (A) with lock nuts (B).
10. Install the lock collar (C) onto the bearing, and rotate it
clockwise (counterclockwise for right side) until tight.
11. Tighten the setscrew with a 6 mm Allen key.
12. Remove support from under the roller.
13. Tension the drapers. Refer to Section
Belt Tension on Front Deck, page 69
.
Figure 4.146: Left Side – Right Side Opposite
169489
150
Revision A
Advertising