7safety signs, 1installing safety decals, Safety signs – MacDon PW8 Pick-Up Header User Manual
Page 16: Installing safety decals, 7 safety signs, 1 installing safety decals
1.7
Safety Signs
• Keep safety signs clean and legible at all times.
• Replace
safety
signs
that
are
missing
or
become illegible.
• If original parts on which a safety sign was installed are
replaced, be sure the repair part also bears the current
safety sign.
• Safety
signs
are
available
from
your
Dealer
Parts Department.
Figure 1.16: Read Operator’s Manual before
Operating
1.7.1
Installing Safety Decals
To install a safety decal, follow these steps:
1. Be sure the installation area is clean and dry.
2. Decide on the exact location before you remove the decal backing paper.
3. Remove the smaller portion of the split backing paper.
4. Place the sign in position and slowly peel back the remaining paper, smoothing the sign as it is applied.
5. Small air pockets can be smoothed out or pricked with a pin.
169489
8
Revision A