MacDon PW8 Pick-Up Header - Manual (Page 45)

OPERATION
14. Position coupler (A) onto header receptacle, and push
handle (B) downward to engage coupler pins into
receptacle.
15. Push handle to closed position until lock button (C)
snaps out.
16. Open cover on header electrical receptacle (D).
17. Remove electrical connector (E) from storage cup on
combine, and route to header receptacle (D).
18. Align lugs on electrical connector (E) with slots in
receptacle, push connector onto receptacle (D), and
turn collar on connector to lock it in place.
Figure 3.17: Attaching Coupler
Detaching from Case IH Combine
DANGER
Stop engine and remove key from ignition before leaving operator’s seat for any reason. A child or even
a pet could engage an idling machine.
1. Choose a level area. Position header slightly above
ground. Stop engine and remove key.
2. Push in lock button (C), and pull handle (B) upward to
release coupler (A).
Figure 3.18
169489
37
Revision A