MacDon PW8 Pick-Up Header User Manual
Page 133
Advertising
5. Remove screws (A) from guide (B), and remove
guide (B).
Figure 4.87
6. Install new guides (A) from inside auger with existing
screws (B) and tee nuts (C) as shown. Torque screws
to 75 lbf·in. (85 N·m).
7. Reinstall finger. Refer to Section:
Figure 4.88
8. Install access cover (B) with screws (A) coated with
Loctite
®
. Torque screws to 75 lbf·in (8.5 N·m).
Figure 4.89
169489
125
Revision A
Advertising