MacDon PW8 Pick-Up Header User Manual
Page 51
Advertising
9. Remove cover (A) from combine multi-coupler
receptacle.
Figure 3.33: Combine Receptacle
10. Pull handle (A) on header to release multi-coupler
(B) from storage position. Remove coupler, and push
handle back into header to store.
Figure 3.34: Releasing Coupler
11. Place coupler (A) onto combine receptacle.
12. Pull out knob (B) to release handle, and pull handle (C)
to engage pins in coupler.
Figure 3.35: Engaging Coupler
169489
43
Revision A
Advertising