MacDon PW8 Pick-Up Header User Manual
Page 44
Advertising
9. Rotate disc (B) on header driveline storage hook (A),
and remove driveline from hook.
Figure 3.14: Driveline
10. Pull back collar (A) on end of driveline, and push onto
combine output shaft (B) until collar locks.
Figure 3.15: Attaching Driveline
11. Open cover (A) on header receptacle.
12. Push in lock button (B), and pull handle (C) upward to
full open position.
13. Remove coupler (D) from combine, and clean mating
surfaces.
Figure 3.16: Coupler Lock
169489
36
Revision A
Advertising