MacDon PW8 Pick-Up Header - Manual (Page 115)

MAINTENANCE AND SERVICING
3. Secure motor with lock nuts (A), and torque nuts (A) to
37 lbf·ft (50 N·m) with a 16 mm socket.
IMPORTANT:
Hydraulic motor must be able to move slightly
during operation. Tighten to required torque, and
DO NOT use washers or shims.
Figure 4.42
4. If installing new motor, install hydraulic fittings (A) from
original motor.
Figure 4.43
5. Reattach hydraulic hoses (A) to motor.
Figure 4.44
Removing Rear Hydraulic Motor
DANGER
Stop engine and remove key from ignition before leaving operator’s seat for any reason. A child or even
a pet could engage an idling machine.
169489
107
Revision A