MacDon PW8 Pick-Up Header - Manual (Page 164)

MAINTENANCE AND SERVICING
4. Remove cotter pins (A), and washers (B) from clevis
pins (C) and (D).
5. Support the hold-down (E) to take the weight off the
cylinder (F), and remove clevis pin (C) at barrel end of
cylinder. Cylinder should drop free of hold-down arm.
Figure 4.158
6. Insert a block of wood between the hold-down arm (A)
and the pick-up to keep the hold-down up and free of
work area.
Figure 4.159
7. Remove clevis pin (A) at rod end of cylinder, and
remove cylinder and safety prop (B).
Figure 4.160
169489
156
Revision A