MacDon PW8 Pick-Up Header - Manual (Page 78)

OPERATION
1. Rear Deck – Right Side
a. Loosen three clamp bolts (A).
b. Loosen jam nut (B).
c. Turn adjuster nut (C) to set draper tension. Proper
tension is achieved when the draper lines up with
the indicator notch (D).
d. Tighten clamp bolts (A) and jam nut (B).
Figure 3.87: Rear Deck – Right Side
2. Rear Deck – Left Side
a. Loosen two clamp bolts (A).
b. Loosen jam nut (B).
c. Turn adjuster nut (C) to set draper tension. Proper
tension is achieved when the draper lines up with
the indicator notch (D).
d. Tighten clamp bolts (A) and nut (B).
Figure 3.88: Rear Deck – Left Side
169489
70
Revision A