MacDon PW8 Pick-Up Header User Manual
Page 145
Advertising
3. Open left endshield (A). Refer to Section
Figure 4.113
4. Remove drive hydraulic motor (A). Refer to Section
Removing Rear Hydraulic Motor, page 107
Figure 4.114
5. Manually turn the roller until the setscrew (A) in the
lock collar (B) lines up with the recess in the bearing
support (C).
6. Loosen setscrew (A) in lock collar (B) with a 6 mm
Allen key. Rotate collar counterclockwise to loosen,
and remove collar.
Figure 4.115
169489
137
Revision A
Advertising