MacDon PW8 Pick-Up Header - Manual (Page 55)

OPERATION
8. Close combine driveshield (A).
9. Start engine, and lower feeder house until saddle (B)
disengages and clears header support (C).
10. Slowly back combine away from header.
Figure 3.43
3.10.3 New Holland CR/CX Series Combine
This section provides instructions for attaching the MacDon
PW8 Pick-Up Header to and detaching from all New
Holland CR/CX Series combines.
Figure 3.44: New Holland Combine
Attaching to New Holland CR/CX Series Combine
WARNING
Stop combine engine and remove key before making
adjustments to machine. A child or even a pet could
engage the drive.
1. Pull handle (A) on combine to raise hooks (B) on both
sides of the feeder house.
Figure 3.45: Feeder House Locks
169489
47
Revision A