MacDon PW8 Pick-Up Header - Manual (Page 81)

OPERATION
3.14 Storing the Header
Do the following at the end of each operating season:
CAUTION
Never use gasoline, naphtha or any volatile material for cleaning purposes. These materials may be toxic
and/or flammable.
1. Clean the header thoroughly.
2. Store in a dry, protected place if possible. If stored outside, always cover combine with a waterproof canvas or
other protective material.
3. Raise header and engage header lift cylinder safety props on combine.
4. If possible, block up the header to take weight off tires.
5. Repaint all worn or chipped painted surfaces to prevent rust.
6. Loosen draper belts.
7. Lubricate the header thoroughly, leaving excess grease on fittings to keep moisture out of bearings. Apply
grease to exposed threads, cylinder rods, and sliding surfaces of components.
8. Check for worn components, and repair as necessary.
9. Check for broken components, and order replacements from your MacDon Dealer. Attention to these items right
away will save time and effort at beginning of next season.
10. Replace or tighten any missing or loose hardware. Refer to Section: 4.2.1 Torque Specifications, page 76 .
169489
73
Revision A