MacDon PW8 Pick-Up Header - Manual (Page 137)

MAINTENANCE AND SERVICING
7. Remove M6 flange nuts (A), fingers (B), and straps (C)
connecting adjacent belts.
8. Remove draper belt (D).
Figure 4.95
Installing Front Draper Belt
1. Wrap new draper belt (A) slats outward, around the
rollers. Arrow on belt should point in direction of
rotation.
Figure 4.96
2. Connect draper belt with M6x15.5 pronged elevator
bolts (1).
Figure 4.97: Elevator Bolts
1. Pronged Elevator Bolt 2. Square Neck Elevator Bolt
169489
129
Revision A