Drive drive module – Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual User Manual
Page 119
Specifications 5-60
Publication 198-UM002A-EN-P December 2001
Figure 5.40 198-IB2XOB5S Electrical and Application Schematic (Continued)
Note: Reverse command can also be disabled via the program.
Table 5.33 198-IB2XOB5S Specifications
Terminal Block (2.54 mm Pitch 10-Position)
Connection Capacity
Solid wire
0.13…0.5 mm
2
(# 28…20 AWG)
Flexible wires
0.13…0.5 mm
2
(# 28…20 AWG)
Flexible wires with ferrules
0.25…0.5 mm
2
(# 20 AWG)
Plastic collar
0.25…0.5 mm
2
(
# 20 AWG)
Wire Type
Use 75 C copper wire min.
12
3
Au to
closed
closed
Drive runs per Drive module
Of f
open
open
Drive does not run
Hand
closed
open
open
closed closed
Dr iv e runs at programmed speed
Forward Out
Reverse Out
DRIVE
DRIVE MODULE
Speed 1 Out
Speed 2 Out
Speed 3 Out
Stop
Speed 1
Speed 2
Speed 3
Reverse
Forward
Stop
Comm
Comm
IN 2
IN 1
+24V DC out
+24V DC out
Disconnect
Au to
Hand
S1
1
2
Of f
3
Series A Typical Wiring to Bulletin 160 Drive with Hand-Off-Auto Forward Only