Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual - Manual (Page 81)

Specifications 5-22
Publication 198-UM002A-EN-P December 2001
Flexible wires with ferrules 0.5…2.5 mm 2 (20…14 AWG)
Plastic collar 1.5 mm 2 (16 AWG)
Wire Type Use 75 C copper wire min.
Tightening Torque Spring clamp
Terminal Block (1/2 x 20 Female 4-Pin)
M12 Mounting Hole 16 mm (5/8 in.)
M12 Thread 1/2 x 20 in.
M12 Connector Torque 1.4 Nm (12 lb-in.)
Electrical
Module Operating Voltage Range 11…25V DC
Module Voltage Rating 24V DC
Module Current Draw 11 mA @ 24V DC
Input Voltage Rating 120V AC
Input On-State Voltage Range 79…132V AC
Input On-State Current 11 mA @ 79V AC
16 mA @ 120V AC
Input Off-State Voltage Range <20V AC
Input Off-State Current <3.5 mA
Module Isolation 132V AC working voltage
1500V AC for 1 s
Input Filter — Software
Selectable (with two I/O modules) Off to On 1, 2, 4, 8, 16 ms
On to Off 1.3, 2, 4, 8, 16 ms
Input Compatibility IEC 1+
Environmental
Ambient Temperature Operating –25…+40 ° C (–4…+104 ° F)
Storage –40…+85
°
C (–40…+185
°
F)
Relative Humidity 0…95% non-condensing
Shock Operating 30 g peak acceleration
Non-Operating 50 g peak acceleration
Operating Vibration 10 g @ 58…2000 Hz
0.060 in. peak-to-peak displacement 2…57 Hz
Per IEC 68-2-6
Approvals
Agency Certification
(when product is marked) cULus Listed
CE marked for all applicable directives
Table 5.15 198-IA2-G4 Series A Specifications (Continued)