Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual - Manual (Page 15)

Publication 198-UM002A-EN-P December 2001
Chapter
2
Installation
Chapter Objectives
This chapter contains information about:
• Device storage and operating environment
• Mounting
• Connecting and wiring
Storage and Operation
To prolong the product life, take the following precautions:
• Store within an ambient temperature range of –40…+85 ° C (–40…+185 ° F).
• Store within a relative humidity range of 0…95%, non-condensing.
• Avoid storing or operating the device where it could be exposed to a corrosive
atmosphere.
• Protect from moisture and direct sunlight.
• Operate at an ambient temperature range of –25…+60 ° C (–4…+140 ° F). The
Modular DSA I/O System enclosure is suitable for an ambient of –25…+40 ° C.
Modular DSA I/O System is suitable for use in an industrial environment when installed in
accordance with these instructions. Specifically, this equipment is intended for use in a clean,
dry environment (Pollution Degree 2
➊ ) ➋ .
➊ Pollution Degree 2 is an environmentally where, normally, only non-conductive pollution occurs except
occasionally a temporary conductivity caused by condensation shall be expected.
➋ Pollution Degree 2 is an International Electrotechnical Commission (IEC) designations.