Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual User Manual
Page 34
3-13 Operation
Publication 198-UM002A-EN-P December 2001
➊ Revision 4.xxx and higher includes DeviceLogix. Be sure that the last three digits of the EDS file name are at
least “400” or the EDS file will not work with a Series C MDSA.
➋ These are the catalog numbers for distributed motor starters. These three catalog numbers reported by a
198-DNG module when the “Motor Starter Type” attribute in the DeviceNet Interface object is set to a value
of 1, 2 or 3. This results in the MDSA reporting a Device Type of 22 (Motor Starter). For a complete description
of Motor Starter Type operation, refer to Appendix B
After obtaining the needed EDS file(s), do the following:
1. From the
7RROV menu, choose ('6 :L]DUG. The following screen appears:
Table 3.1 Series C MDSA EDS files
Vendor
Code
Device
Type
Product
Code
Revision ➊ Cat. No.
EDS file
1
12
67
4.xxx
198-DN
0001000C00430400.eds ➊
1
12
98
4.xxx
198-DNG
0001000C00620400.eds ➊
1
22
1
4.xxx
190D➋
0001001600010400.eds ➊
1
22
2
4.xxx
191D➋
0001001600020400.eds ➊
1
22
3
4.xxx
160D➋
0001001600030400.eds ➊
IMPORTANT
The EDS files listed in the table above can be obtained via the internet
at: http://www.ab.com/networks/eds. Make sure that the EDS file
revision number matches the revision code printed on the MDSA
module.