Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual - Manual (Page 163)

DeviceNet Information A-29
Publication 198-UM002A-EN-P December 2001
Multiple instances of the Discrete Input Point Object are supported. All instances contain the
following attributes.
The following common services are implemented for the Discrete Input Point Object.
Discrete Output Point Object
CLASS CODE 0x0009
The following class attributes are supported for the Discrete Output Point Object:
Multiple instances of the Discrete Output Point Object will be supported. All instances will
contain the following attributes.
The following common services will be implemented for the Discrete Output Point Object.
Table A.51
Attribute ID Access Rule Name Data Type Value
3 Get Value BOOL 0=OFF, 1=ON
Table A.52
Service Code Implemented for: Service
Class Instance Name
0x0E Yes Yes Get_Attribute_Single
0X10 No Yes Set_Attribute_Single
Table A.53
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT 1
2 Get Max Instance UINT 0…80
Table A.54
Attribute ID Access Rule Name Data Type Value
3 Get Value BOOL 0=OFF, 1=ON
5 Get/Set Fault Action BOOL 0=Fault Value attribute, 1=Hold Last State
6 Get/Set Fault Value BOOL 0=OFF, 1=ON
7 Get/Set Idle Action BOOL 0=Fault Value attribute, 1=Hold Last State
8 Get/Set Idle Value BOOL 0=OFF, 1=ON
Table A.55
Service Code Implemented for: Service Name
Class Instance
0x0E No Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single