Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual User Manual
Page 46
Advertising
3-25 Operation
Publication 198-UM002A-EN-P December 2001
2. Enter the following as shown below.
a. Class = 9
b. Instance = 4
c. Attribute = 7
d. Service Code = “Set Single Attribute”
e. Transmit Data Size = “Byte”
f. Data Sent to the Device = 1
3. After the screen above appears, click the
([HFXWH button. Upon successful execution,
the message “The execution was completed” will appear in the “Data received from
the device” box.
Advertising