Mapping to the scanner, Mapping to the scanner -10 – Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual User Manual
Page 31
Advertising
![background image](/manuals/577535/31/background.png)
Operation 3-10
Publication 198-UM002A-EN-P December 2001
Mapping to the Scanner
To map the MDSA in the scanlist of a scanner, double-click on the scanner icon in
RSNetWorx for DeviceNet. The following screen will appear:
1. Select the “Scanlist” tab. The user will be asked to upload the configuration to the
device. Press the
8SORDG button to allow RSNetWorx to upload the scanlist from the
scanner. When the uploading is complete, the following screen will appear:
Advertising