Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual - Manual (Page 74)

5-15 Specifications
Publication 198-UM002A-EN-P December 2001
Assembly Instances 104 and 105 are default for 198-DNG. Assembly Instances 106 and 107
are default for 198-DN.
Figure 5.9 198-IB4S Electrical and Application Schematic
Table 5.10 198-IB4S I/O Produced/Consumed Data
Input Data — Assembly Instance 103, 105, or 107
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
— — — — Input 4 Input 3 Input 2 Input 1
Input Data — Assembly Instance 101
Bit 3 or 7 Bit 2 or 6 Bit 1 or 5 Bit 0 or 4
Input 4 Input 3 Input 2 Input 1
Output Data — Assembly Instance 102, 104, or 106
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
— — — — — — — —
Output Data — Assembly Instance 100
Bit 3 or 7 Bit 2 or 6 Bit 1 or 5 Bit 0 or 4
Compressed format, no data sent
Table 5.11 198-IB4S Specifications
Terminal Block (3.5 mm Pitch 8-Position)
Connection Capacity
Solid wire 0.13…1.5 mm 2 (24…16 AWG)
Flexible wires
0.13…2.5 mm
2
(24…14 AWG)
Flexible wires with ferrules 0.5…2.5 mm 2 (20…14 AWG)
Plastic collar
1.5 mm 2 (16 AWG)
In4
In3
In1
In2
+V out
+V DC
0V
+V out
+V out
+V out
DC
DC
Contact
Closure